LHCXRC CLOUD 225 225mm Wheelbase 5mm Arm Carbon Fiber 5 Inch DIY Frame Kit Support DJI O3 Air Unit for RC Drone FPV Racing
Specification:
- Model: CLOUD 225
- Wheelbase size: 225mm
- Top plate thickness: 2.5mm
- Bottom plate thickness: 2.5mm
- Arm thickness: 5mm
- Flight control installation hole position: 20mm X 20mm /30.5mm x 30.5mm
- Flight control installation height: 25mm
- Video transmission installation hole position: 20mm X 20mm / 25.5mm x25.5mm
- Motor mounting hole distance: 16mm X 16mm / 19mm X19mm
- Camera installation size: 20mm X 20mm
- Suitable blade size: 5 inch propeller blade
- Dimensions: 275mm X 225mm X 40mm
- Weight: 140g±5g (including 3D printing parts)
Features:
- The wide X design of the arm makes the flying attitude stable and flexible, suitable for flexible flower flying shooting.
- The quick-release design of the machine arm is convenient for replacement.
- 16mm x16mm and 19mm x 19mm motor holes can be installed.
- With a camera mounting base, for installing GoPro Hero 8 Naked Camera and INSTA 360 GO 2 cameras.
- Specially designed with CNC aluminum alloy heat sink for DJI O3 Air Unit
- The 7075 aluminum alloy CNC side plate can be perfectly adapted to the new high-definition digital image transmission lens of DJI O3 air unit.
Recommended Parts (not included)
- Brushless Motor: 2207 / 2306
- Flight Controller: F4 / F7
- Lipo Battery: 6S 1300mah/1500mah
- Propeller: 5136 / 5226
The following Parts are Compatible: ( Not included)
- FC ESC Stack: 20x20mm iFlight BLITZ Mini F7 FC & BLITZ Mini E55 4in1 ESC BL_32
- MAMBASYS F405 MK2 Betaflight Flight Controller F40 40A 3-6S ESC
- Motor: iFlight XING-E Pro 2207 2207 1800KV 3-6S Brushless Motor
- IFlight XING2 2306 1755KV 6S Brushless Motor
- Propeller: Gemfan Freestyle4 5136 5.1×3.6×3 5.1 Inch 3-Blade Propeller
- Gemfan Freestyle 5226 5.2×2.6 5.2 Inch 3-Blade Propeller
- Lipo Battery: ZOP Power 22.2V 1300mAh 100C 6S LiPo Battery XT60 Plug
Product List:
- 1 x upper plate 2.5mm
- 1 x Front Bottom 2.5mm
- 1 x Back Plate 2.5mm
- 2 x Front arms 5.0mm
- 2 x rear arms 5.0mm
- 4 x Textured aluminum column M3x25
- 12 x round M3x6 screws
- 4x round head M3x9 screws
- 4x round head M3x11 screws
- 4 x Round Head M3x14 Screws
- 4 x round head M3x28 screws
- 4 x M1.6×8 screws (for dji O3 air unit mounting screws)
- 4 x Nylon Hex Nuts M3x3
- 8 x rivet nuts M3 (already pressed)
- 2 x CNC Front Aluminum Parts
- 1 x CNC aluminum video transmission heat sink
- 1 x camera vibration reduction 3D print left
- 1 x camera vibration reduction 3D print right
- 1 x Video Transmission Antenna Installation 3D Printing
- 1x GPS mount 3D print
- 1x receiver T-antenna mount 3D print
- 1 x 3D print camera Mounting Base
- 1 x battery rolling strip
- 1 x Anti-slip mat for battery
- 4x Arm EVA Foot Pads
- 1x Product Installation Manual